配置见后！
设置400X8全部默认，过OR1小时;空闲时CPU电压1.08V，OR时1.21V。
设置400X9全部默认，但加压50mv.过OR，空闲时CPU电压1.23V，OR时掉牙1.20V。
设置444X9，加压100MV，OR过40分钟。空闲时CPU电压1.28V，OR时掉牙1.248V。保存设置在BIos中；
冲击500X8，开不了机，我估计内存不行。
就重新启动读444X9的设置。
居然，竟然，无语，进不了系统。大部分情况系统在自检内存后当机，偶尔能够看到XP的滚动条，但死活再也进不去系统？？？
下面是我现在尝试的设置，始终再也不能进系统了，请帮忙！
另外：我的金士顿内存能否长期工作在2.2 V，默认电压是1.8？？
Genie BIOS Settings:
Exit Setup Shutdown:....................Mode2
Shutdown after AC loss.................Disabled
O.C. Fail retry Counter.....................1
Clock VCO divider..................Auto
CPU Clock Ratio:........................9X
Clock N/2 Ratio.....................Disabled
Targer CPU Clock.........................3996 MHz
CPU Clock:..............................444MHz
Boot Up Clock:..........................335
DRAM Speed:.............................333/667
Target DRAM Speed......................DDR2 901
PCIE Clock:..............................100 MHz
CPU Spread Spectrum..................Disabled
PCIE Spread Spectrum..................Disabled
SATA Spread Spectrum..................Disabled
CPU Feature:
Thermal Management Control:.............Disabled
PPM(EIST) Mode...........................Disabled
Limit CPUID MaxVa:........................Disabled
C1E Function:...........................Disabled
Execute Disable Bit:....................Disabled
Virtualization Technology:..............Disabled
Core Multi-Processing..........................Enabled
Voltage Settings:
CPU VID Special Add.......+100.0mV (I tried +125mv but it made no difference)
DRAM Voltage Control:...................1.925V( 2.025 is not ok yet)
SB 1.05V Voltage......................1.070V
SB Core/CPU PLL Voltage.............1.55V
NB Core Voltage........................1.45V
CPU VTT Voltage.........................1.200V (1.25v is not ok yet)
Clockgen Voltage Control..............3.60V
CPU GTL 0/2 REF Volt......................0.67X
CPU GTL 1/3 REF Volt......................0.67X
North Bridge GTL REF Volt.................0.67X( The different value of GTL could lead to diffenert effects, either died at detecting memory or died at XP's scroll bar)
CPU Core Voltage............1.26V
DRAM Voltage................1.93V
NB Core Voltage...............1.43V
CPU VTT Voltage..............1.20V
DRAM Timing:
Rather relaxed level.小参一概设置“relaxed".
Normal
Normal
T2 Disable
K版说的那几个指标设置成5 4 4！！！
曾经的辉煌再也没有出现？？？？？！！！！！！！！！！！！！！！！！！！！！！！！！！！！！！！！！！！！！！！！！！！！！！！！！！！！！！！！！！！！！！！！！！！！！！！！！！！！！！
Dk p35 t2rs;Bios version=Aug 2008
Intel E8400, EO, Vid=1.08v
Kingston ddr2 800. 2g*2, 5,5,5,18,
Acbel ,Rating=450W, Max=580W
One Gainword 8800gs 678MB, 660/1800
Seagate 250G Ide;Maxtor 60G Ide. Two hard drivers,no raid.
No ATAPI Devices
T2RS integrated Sound card and Lan
Winxp professional Sp3
[
本帖最后由 zhaokguizhou 于 2008-9-18 22:26 编辑 ]
