CPU：INTEL E8200（盒）
FAN：ASUS V70
主板：ASUS MAXIMUS FORMULA（X38）
内存：Crucial BallistiX 6400CL4 1G*2
硬盘：ST250G 7200.10
显卡 ：影驰8800GS骨灰魔魂0.8ns 600/2000
电源：航嘉宽幅王350W
机箱：TT海啸侧透
CPU编号Q748A372
主板BIOS 0907
内存MT的800条刷过1066
影驰的8800GS骨灰贴上了COOLERMASTER的显存散热片(电压跳线已经变到1.3V)
CPU Feature:
Ai Overclock Tuner [Manual]
OC From CPU Level Up [Auto]
CPU Ratio Control [Manual]
Ratio CMOS Setting: [8]
FSB Frequency [550]
FSB Strap to North Bridge [Auto]
PCIE Frequency [110 for 3D; 100 for normal]
DRAM Settings: DDR2
DRAM Frequency DRAM Command Rate [Auto]
DRAM Timing Control [Manual]
CAS# Latency [4]
RAS# to CAS Delay [4]
RAS# Precharge [4]
RAS# Active Time [12]
RAS# To Ras# Delay [4]
Row Refresh Cycle Time [42]
Write Recovery Time [6]
Read To Precharge Time [3]
Read To Write Delay(S/D) [8]
Write To Read Delay(S) [3]
Write To Read Delay(D) [5]
Read To Read Delay(S) [4]
Read To Read Delay(D) [6]
Write To Write Delay(S) [4]
Write To Write Delay(D) [6]
DRAM Static Read Control [Disabled]
Ai Clock Twister [Strong]
Transaction Booster [Enabled]
Boost Level [0]
Voltage Settings:
CPU Voltage [1.4v~1.6v]
CPU PLL Voltage [Auto]
North Bridge Voltage [1.61v~1.7v]
DRAM Voltage [2.16v~2.35v]
FSB Termination Voltage [1.5v]
South Bridge Voltage [Auto]
Loadline Calibration [Enabled]
CPU GTL Reference [0.63x]
North Bridge GTL Reference [0.63x]
DDR2 Channel A REF Voltage [Auto]
DDR2 Channel B REF Voltage [Auto]
DDR2 Controller REF Voltage [DDR2_REF]
SB 1.5V Voltage [Auto]
给你传上BIOS的图吧!
这个是超500没加压的时候!
第一次上550时候的电压!呵呵
第2次上550电压
第3次上550电压(再低不行了)
下面补上3D MARK的测试图!
540外频单跑CPU看看等会跑分会不会死机!先检测下是否稳定!共跑了5次应该没问题了
超的也不算很高 想破1W4 看情况了88GS这个分已经比很多88GT多了!4核U还能高2500分吧!
[
本帖最后由 lujichao0322 于 2008-4-4 17:03 编辑 ]
